The NX-5600HB is a 110-watt mobile transceiver that supports NXDN digital protocol and FM analog for mixed operation. This high-power VHF Low Band RF deck - equipped with Bluetooth®, GPS and a memory card slot - requires one of several optional remote control heads, all of which offer an intuitive controls for easy operation. The versatile NX-5600HB can be combined with other RF decks and multiple remote control heads to create a radio system that is tailored to your specific needs, thanks to a wide selection of accessories.

PRODUCT HIGHLIGHTS

• VHF Low Band 39 MHz to 50 MHz
• RF output power: 110 W to 25 W
• Multi RF Deck with VHF Low band / VHF High band
• UHF / 700 & 800 MHz combination
• Mixed Digital & FM Analog Operation allows gradual migration
• Variety of Optional Remote Control Heads (Note: NX-5600HBis remote operation only)
• Dual Remote Control Head and Multi-band (Multi RF deck) capable options
• Easy-to-follow controls and Information Conveying Multi-line Text are built into each control head
• Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
• Built-in GPS Receiver for effective fleet management
• Built-in Bluetooth 4.0 for hands-free operation
• USB Micro Terminal (up to 12 Mbps)
• PC Programming & Internal microSD Access (Requires USB driver for PC)
• Renowned KENWOOD Audio Quality can be achieved with Active Noise Reduction that utilizes built-in DSP for suppression of ambient noise
• microSD / microSDHC (Up to 2GB / 32GB) Memory Card Slot for increased memory capacity for "Voice & Data"
• DB-25 & Molex 9-pin Accessory Connector12 W Audio Output
• IP54 / 55 and MIL-STD-810 C/D/E/F/G

Over 7x faster processing speed and 15x more memory capacity than the previous models, these NEXEDGE NXR-5700/5800 repeaters represent a breakthrough in performance. Extensive data storage means they can support everything from analog/digital conventional systems up to a highly sophisticated NEXEDGE Generation2 (Gen2) multi-site digital trunked network. And further adding to their future-proof credentials is upcoming support for Digital Simulcast. Stay ahead of the curve, with cutting-edge communications.

• Wideband Coverage
• 25/5/0.5 W RF Output Power
  (100% Duty Cycle)
• Two-Digit Numeric Display
  
• LED Status Indicators
  
• USB 2.0 Type-B Interface
  
• IP LAN/WAN Connectivity
  
• Ethernet Network Interface
  
• 6 Programmable Function Keys
  
• 0.3 W Front Panel Speaker
  
• 3 W External Speaker Audio
  
• Volume Control
  
• Program / Modem Interface
  
• Remote Termination Interface
  
• Programmable AUX I/O's
  
• DTMF Remote Control
  
• Flash Firmware Upgrading
  
• Remote System Firmware Updates
  
• Telephone Interconnect Option

This versatile handheld radio supports both NXDN and DMR digital protocols as well as mixed digital & FM analog operation, enabling it to serve with distinction in a wide range of enterprise- and operation-critical applications. Compact yet designed with durability in mind, it's packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. Additionally, for expansion capability a software license certification system facilitates extensive customization.

PRODUCT HIGHLIGHTS

• Multi-protocol digital radio: Designed to operate under an NXDN or DMR digital, and FM analog protocols
• Mixed Digital & FM Analog Operation allows gradual migration at your own pace
• 4-Line Basic Frame (2 lines of icon & key guide) / 14 Characters
• 5-Line Text Message Frame (3 Lines of Text, icon & key guide)*
• 7-Color Light Bar Indicator on the top panel
• 4-way Directional-pad (D-pad) for intuitive control and operation
• Built-in GPS Receiver/Antenna for effective fleet management
• Built-in Bluetooth for hands-free operation - Applicable Bluetooth profiles: HSP (Headset Profile provided) and SPP (Serial Port Profile available as an option)
• Renowned KENWOOD Audio Quality with Active Noise Reduction (ANR) that utilizes built-in DSP
• Software DES and AES Encryptions for Digital protocols
• Built-in Motion Sensor (Man-down, Stationary and Motion Detection)
• MIL-STD-810 C/D/E/F/G*The number of lines may vary depending on the display language (character set).

GENERAL FEATURES

Audio Output Power: 1 Watt

Dual band, 800-900 MHz capability

2-pin audio connector model with 6 contact points to connect with a variety of options, and single mic ANR capability

Intrinsically Safe Option

Paging Call

Emergency Call

Status/Text Message

Remote Stun/Kill/Check

This versatile handheld radio supports both NXDN® and DMR digital protocols as well as mixed digital & FM analog operation, enabling it to serve with distinction in a wide range of enterprise and operation-critical applications. Compact yet designed with durability in mind, it's packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. Three different models with 14-pin Universal connector are available: Full Keypad model with LCD, Standard Keypad model with LCD and a large 4-way D-pad, and the Basic Model without LCD or keypad. Additionally, for expansion capability a software license certification system facilitates extensive customization. Other Features

• Multi-protocol digital radio: Designed to operate under NXDN® or DMR digital, and FM analog protocols
• NXDN Conventional and Type-C & Gen2 Trunking
• DMR Tier II & Site Roaming
• Mixed Digital & FM Analog Operation allows gradual migration at your own pace
• 4-Line Basic Frame (2-Line Main/Sub-LCD, icon & key guide) / 14 Characters
• 5-Line Text Message Frame (3 Lines of Text, icon & key guide)
• 7-color Light Bar Indicator on the top panel
• 4-way Directional-pad (D-pad) for intuitive control and operation
• Built-in GPS Receiver/Antenna for effective fleet management
• Built-in Bluetooth for hands-free operation - Applicable Bluetooth profiles: HSP (Headset Profile provided) and SPP (Serial Port Profile available as an option)
• Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP
• Optional DES and AES Encryption
• Built-in Motion Sensor (Man-down, Stationary and Motion Detection)
• IP54/55/67 and MIL-STD-810 C/D/E/F/G
• 1 Watt Audio Output Power
• UHF: 120 MHz capability
• Available models: Full Keypad (w/ LCD and full keypad), Standard Keypad (w/ LCD and 4-way large D-pad/4 key), and Basic (w/o LCD and keypad)
• 512 CH/128 Zones (64 CH/4 Zones for Basic model)
• Maximum of 1,000 CH/Radio with option

The versatile NX-3220/3320 handheld radio supports both NXDN® and DMR digital protocols as well as mixed digital & FM analog operation, enabling it to serve with distinction in a wide range of enterprise and operation critical applications. Compact yet designed with durability in mind, it's packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. Three different models are available: Full Keypad model with LCD, Standard Keypad model with LCD and a large 4-way D-pad, and the Basic Model without LCD or keypad. Additionally, for expansion capability a software license certification system facilitates extensive customization.

• Multi-protocol digital radio: Designed to operate NXDN® or DMR digital, and FM analog protocols
• NXDN® Conventional and Type-C & Gen2 Trunking
• DMR Tier II & Site Roaming
  
• Mixed Digital & FM Analog Operation allows gradual migration at your own pace
  
• 4-Line Basic Frame (2-Line Main/Sub-LCD, icon & key guide) / 14 Characters
  
• 5-Line Text Message Frame (3 Lines of Text, icon & key guide)
  
• 7-color Light Bar Indicator on the top panel
  
• 4-way Directional-pad (D-pad) for intuitive control and operation
  
• Built-In GPS Receiver/Antenna for effective fleet management
  
• Built-in Bluetooth® for hands-free operation - Applicable Bluetooth profiles: HSP (Headset Profile provided) and SPP (Serial Port Profile available as an option)
• Renowned KENWOOD Audio Quality can be achieved with Active Noise Reduction (ANR) that utilizes built-in DSP
  
• Software DES and AES Encryptions for NXDN Conventional/Trunking and DMR Conventional protocols
  
• Built-in Motion Sensor (Man-down, Stationary and Motion Detection)
  
• IP54/55/67 and MIL-STD-810 C/D/E/F/G

This adaptable mobile radio supports both NXDN and DMR digital protocols as well as mixed digital & FM analog operation, enabling it to serve with distinction in a wide range of enterprise- and operation-critical applications.Designed with flexibility in mind, it's packed with convenient features like Bluetooth® for hands-free operation and built-in GPS. And providing greater freedom of installation, the radio's front panel can be used as a remote control head (this requires an optional accessories). Additionally, for expansion capability a software license certification system facilitates extensive customization.

PRODUCT HIGHLIGHTS

• Multi-protocol digital radio: Designed to operate under an NXDN or DMR digital, and FM analog protocols
• Mixed Digital & FM Analog Operation allows gradual migration at your own pace
• 4-Line Basic Frame (2 lines of icon & key guide) / 14 Characters
• 4-Line Text Message Frame (2 Lines of Text, icon & key guide) Note: The number of lines may vary depending on the display language (character set).
• 7-Color LED indicator
• External and Internal Speaker Switching
• Built-in GPS Receiver for effective fleet management
• Built-in Bluetooth for hands-free operation
• Applicable Bluetooth profiles:
  HSP (Headset Profile provided) and SPP (Serial Port Profile available as an option; availability depends on the model)
• Renowned KENWOOD Audio Quality with Active Noise Reduction (ANR) that utilizes built-in DSP
• Software DES and AES Encryptions for Digital protocols
• MIL-STD-810 C/D/E/F/G

NX-1202AV/NX-1302AU is efficient and functional 2W portable radios operate in analog FM. It is packed with features for intuitive operation and excellent performance. The features include a 7-color LED indicator, KENWOOD 2-pin audio accessory connector, renowned KENWOOD audio quality, multiple scan, lone worker and emergency function. If you wish to transition to Digital capability, by purchasing a software option, DMR and Analog or NXDN and Analog mixed operation is available which gives you the freedom and flexibility to migrate at your own pace. All this comes in a tough, compact radio with great value and all weather reliability!

Features:

• RF output power 2W both on VHF/UHF
• Large 7-Color LED indicator on the top panel
  • Selective Power-on LED
  • Selective Call Alert LED
  • Battery Level Indication
  • Multi-status function indication
• Renowned KENWOOD Audio Quality: TX/RX audio profile with optimizable digital processor
  • Audio Equalizer: Flat, High, Low
  • Auto Gain Control: On, High, Low, Off
  • Noise Suppressor
  • Microphone type settings
• Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi, Normal Scan
• VOX & PTT -triggered Semi- VOX, Voice-operated TX
• Emergency Function: Customizable Emergency Profile
• Lone Worker
• Max / Min Volume setting & Volume control
• Voice Announcement
• Remote Stun / Kill / Check
• Electronic Serial Number (ESN)
• MIL-STD-810 C/D/E/F/G
• IP54 and IP55
• Multi-protocol digital radio: Designed to operate under NXDN or DMR digital and FM analog protocols (Optional License required)

Kenwood's new NXR-710 and NXR-810 NEXEDGE® repeater is a low-cost, high performance unit that provides a cost effective infrastructure solution for single-site, local area applications. The NXR-710/810 will provide analog or digital operation, and is perfectly suited for a variety of operating environments such as sewage treatment plants, hospitals and hotels.

Below is a brief list of features. For a complete list of product features and specifications, please download the product brochure.

FEATURES

• 136-150, 146-174 MHz
• 400-430, 450-480, 480-512 MHz
• 40 / 110 / 250 Watt VHF Systems
• 40 / 100 / 250 Watt UHF Systems
• 40 / 80 / 130 Watt 800 MHz Systems
• Repeater Operation
• Duplex / Simplex Base Operation
• VHF/UHF models only)
• 30 CH Scanning Base (VHF/UHF Conventional)
• Two-Digit LED / LED Status Indicators
• 6 Programmable Function Keys
• Internal & External Speaker Audio
• Volume Control, Microphone Jack
• Program / Modem Interface
• Remote Terminal Interface
• Programmable AUX I/O's
• DTMF PF Key & AUX I/O Mon/Control

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace - whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.

Features:

• Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2) protocols
• Any combination of two digital protocols may be selected from NXDN, DMR, and P25
• Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
• Large, Color 2.55" (154 x 422 pixels) TFT Display for at-a-glance operational status
• Easy to follow GUI and Multi-line Text to convey information
• Dual Remote Control Head and Multi-Band (Multi RF Deck) Control Option providing scalable configurations for various operations and applications
• Built-In GPS Receiver for effective fleet management
• Bluetooth® Module Built-in for hands-free operation
• Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
• Built-in 56-bit DES Encryption
• Optional 256-bit AES Encryption
• microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data"
• 50 W to 5 W (136-174 MHz) Models
• 45 W to 5 W (380-470, 450-520 MHz) Models
• 30 W to 2 W (700 MHz) Model 35 W to 2 W (800 MHz) Model
• Maximum of 1024 CH/Zone, 128 Zones (4000 CH. Opt)
• DB-25 Accessory Connector
• AMBE+2™ Enhanced Vocoder
• 4 W Speaker Audio

The NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs - NXDN, DMR and P25 (Phase 1 & 2) - plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace - whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. A NX-5000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/DMR/NXDN, FM/NXDN/P25, and FM/DMR/P25.

Features:

• Multi-Digital operation in NXDN, DMR, and P25 (Phase 1 & 2)
• Any combination of two digital protocols may be selected from NXDN, DMR, and P25
• Mixed Digital & FM Analog Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites
• Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses
• Easy to follow GUI for at-a-glance operational status and Multi-line Text to convey information
• 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control
• Built-In GPS Receiver/Antenna for effective fleet management
• Bluetooth® Module Built-in for hands-free operation
• Renowned KENWOOD Audio Quality achieved with Active Noise Reduction (ANR) that utilizes built-in DSP with two microphones for suppression of ambient noise
• Built-in 56-bit DES Encryption
• Optional 256-bit AES Encryption
• Built-in Motion Sensor for man down detection
• microSD/microSDHC Up to 2GB/32GB Memory Card Slot for increased memory capacity for "Voice & Data""
• IP67/68 and MIL-STD-810 C/D/E/F/G
• 6 W (136-174 MHz ) Models
• 5 W (380-470, 450-520 MHz) Models
• 3 W (700/800 MHz) Models
• Full Key Models (w/numeric keypad) and Standard Key Models (w/o numeric keypad)
• Maximum of 1024 CH, 128 Zones (4000 Ch. Opt)
• 1 W Speaker Audio

TRUNKING 2.5 was born as an unique technology for KENWOOD to provide a DMR-based trunking solution for shared-use frequencies. Providing a solid answer that offers capacity, flexibility, and capability, the TKR-2500 repeater brings forward KENWOOD’s rich history of reliability and performance to our extensive range of customers.

Providing the backbone of TRUNKING 2.5, the TKR-2500V/U repeaters exclusively work with the KENWOOD NX-3000/5000 subscribers. The companion KTI-2500 controller allows for full scale system management and integration, as well as redundancy.

Features

• 50 - 2 W @ 100% Duty (136-174 MHz)
• 40 - 2 W @ 100% Duty (470-520 MHz)
• 40 - 2 W @ 100% Duty (400-470 MHz)
• 1U Height / 19-inch1.71-inch
• Built-in IP Network Adapter
• Multicast
• CW ID
• SNMP Monitoring
• FCC Type 1 / Type 2 monitoring
• RADIUS / LDAP

Digital – Trunking 2.5

• Hibernation / Quick CCH RotationMixed
• Composite CCH
• Preference Level (CCH Priority)
• USBD (up to 1,000 per min)
• Authentication
• Text Messaging (Up to 46byte)
• IP OTAP
• Priority Interrupt
• Priority Call Notification
• Registration Timer
• Encryption (DES)
Optional Features
• KTI-2500 System Controller
• AIS Calling
• SIP Calling
• G.711 TranscoderVoting
• High Availability

A SINGULAR SOLUTION
If you are thinking of harnessing the latest digital protocols - NXDN or DMR - to enhance business efficiency or FM analog for its simplicity, the NEXEDGE NX-1200NV/1300NU radios have you covered. Our singular solution offers the widest selection of two-way radios for everyday use. The model matrix also includes basic and keypad variations, with or without a high-contrast backlit LCD. Other features include a 7-color LED indicator and the popular KENWOOD 2-pin audio accessory connector. Plus, mixed-mode operation ensures seamless integration with legacy radios while smoothing the onward migration path to digital. But whatever your specific needs, audio quality is what determines clear voice communications – which is why KENWOOD radios are used under the most grueling conditions, like the cockpit of a racing car. Thanks to our extensive experience with professional systems, reliability is second to none. So whatever your radio requirements, KENWOOD's NEXEDGE NX-1200NV/1300NU radios offer a single platform that's right for you.

Features:

• Multi-protocol digital radio: Designed to operate under NXDN or DMR digital and FM analog protocols
• Choose from direct & intuitive LCD with standard keypad or basic enclosures
• Easy visible Display: 8-digit LCD models featuring high-contrast white backlit LCD
• Large 7-Color LED indicator on the top panel
  • Selective Power-on LED
  • Selective Call Alert LED
  • Battery Level Indication
  • Multi-status function indication
• RF output power 5W both on VHF/UHF
• Mixed Zone - analog and digital
• Renowned KENWOOD Audio Quality:
  • TX/RX audio profile with optimizable digital processor
  • Audio Equalizer: Flat, High, Low
  • Auto Gain Control: On, High, Low, Off
  • Noise Suppressor
  • Microphone type settings
• Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi, Normal Scan
• VOX & PTT -triggered Semi- VOX, Voice-operated TX
• Emergency Function: Customizable Emergency Profile
• Lone Worker
• Max / Min Volume setting & Volume control
• Voice Announcement
• Remote Stun / Kill / Check
• Front Panel Programming Mode (for Keypad model)
• Electronic Serial Number (ESN)
• MIL-STD-810 C/D/E/F/G
• IP54 and IP55
• Intrinsically Safe Option

The NX-1200/1300 is a natural extension of the NX-Series, offering portables that have features found in our NX-3000 Series radios, making them ideal for industrial settings and as an entry level radio for organizations transitioning from analog to digital.

The new NX-1200/1300 portables operate in two digital protocols - NXDN and DMR - and analog, enabling multi-protocol operation and a seamless transition to digital with mixed mode operation. As ideal entry-level digital radios, the NX-1200/1300 offer a high level of standard features including the option for a 13 segment, 8-character direct and intuitive LCD display, programmable 7-color LED indicator and 40-bit ARC4 enhanced encryption in DMR mode.

Users can select a basic or keypad variation, and all models have a slim profile design and include renowned KENWOOD quality audio for high noise environments, plus the 2-pin audio accessory connector and 2 programmable side keys. The NX-1200/1300 meets military standards 810 C/D/E/F/G and IP54 and 55.

Features:

• Multi-protocol digital radio:
• Designed to operate under NXDN or DMR digital and FM analog protocols
• Choose from direct & intuitive LCD with standard keypad or basic enclosures
• Easy visible Display: 8-digit LCD models featuring high-contrast, white backlit LCD
• Large 7-Color LED indicator on the top panel
• Selective Power-on LED
• Selective Call Alert LED
• Battery Level Indication
• Multi-status function indication
• RF output power 5W both on VHF/UHF
• Mixed Zone - analog and digital
• Renowned KENWOOD Audio Quality: TX/RX audio profile with optimizable digital processor
• Audio Equalizer: Flat, High, Low
• Auto Gain Control: On, High, Low, Off
• Noise Suppressor
• Microphone type setting
• Multiple Scan Functions; Dual Priority, Single Priority, Single Zone, Multi, Normal Scan
• VOX & PTT -triggered Semi- VOX, Voice-operated TX
• Emergency Function: Customizable Emergency Profile
• Lone Worker
• Max / Min Volume setting & Volume control
• Voice Announcement
• Remote Stun / Kill / Check
• Front Panel Programming Mode (for Keypad model)
• Electronic Serial Number (ESN)
• MIL-STD-810 C/D/E/F/G
• IP54 and IP55
• Intrinsically safe option (Available later)

One NEXEDGE radio, multiple protocols*: the NX-5700HB (110 W) / NX-5800HB (100W) mobile transceivers support NXDN and P25 (Phase 1 & 2) digital protocols, plus FM analog for mixed operation. This high-power RF deck - equipped with Bluetooth®, GPS and a memory card slot - requires one of several optional remote control heads, all of which offer an intuitive controls for easy operation. The versatile NX-5700HB/5800HB can be combined with other RF decks and multiple remote control heads to create a radio system that is tailored to your interoperability requirements.
*Note that, unlike NEXEDGE 50W-class models, the NX-5700HB/5800HB mobile series does not support DMR.

Features:

• Multi-digital Operation in NXDN and P25 (Phase 1 & 2) protocols
• Multi RF Deck with Low Band / VHF / UHF / 700 & 800 MHz combination
• Mixed Digital & FM Analog Operation allows gradual migration in mixed sites and easy migration with digital radios in other sites
• Variety of Optional Remote Control Heads (Note:NX-5700HB/5800HB is remote operation only)
  • - Dual Remote Control Head and Multi-band (Multi RF deck) capable options
  • - Easy-to-follow controls and Information Conveying Multi-line Text are built into each control head
• Maximum of 4,000 CH/Radio capacity, 512 CH/Zone, 128 Zones
• Built-In GPS Receiver for effective fleet management
• Built-in Bluetooth 4.0 for hands-free operation
• USB Micro Terminal (up to 12 Mbps)
  • - PC Programming & Internal microSD Access (Requires USB driver for PC)
• Renowned KENWOOD Audio Quality can be achieved with Active Noise
• Reduction that utilizes built-in DSP for suppression of ambient noise
• Built-in 56-bit DES encryption
• Optional 256-bit AES encryption
• microSD/microSDHC (Up to 2GB/32GB) Memory Card Slot for increased
• memory capacity for "Voice & Data"
• RF output power: VHF: 110 W to 25W / UHF: 100 W to 25 W
• DB-25 & Molex 9-pin Accessory Connector
• AMBE+2™ Enhanced Vocoder
• 12 W Audio Output
• IP54/55 and MIL-STD-810 C/D/E/F/G